Preparing concrete surfaces for coatings, overlays, stains or repair materials is a time-consuming task.
Ensuring this essential first step in the process is done correctly is critical to the success of the job.
Shotblasting is a 1 step method for stripping, cleaning and profiling surfaces.
Shotblasting is often used to clean the floor, a benefit with this method is that it "profiles" the floor to receive the bond coat at the same time the floor is cleaned.
CONCRETE SURFACE PREPARATION STEPS:
Resurfacing the concrete to remove all substances that could inhibit the ability of the overlay to bond, such as dirt, oil and grease. It's also necessary to strip away any coatings, sealers or paints that may have been applied to the concrete.
Removing any unsound concrete, such as minor spalling, scaling or delamination, down to solid concrete.
Filling active cracks so they don't mirror through to the overlay. Typically any cracks equal to or wider than the width of a credit card will require repair.
Profiling, or roughening, the concrete surface to improve the "grip" of the overlay.
SURFACE PREPARATION PROCESS
The surface preparation of concrete in readiness for the application of a coating or repair material includes all the steps taken after the removal of the deteriorated concrete. Many of the same steps apply when little or no concrete is removed.
Proper preparation provides a dry, even and level surface free of dirt, dust, oil and grease. Removal of surface contaminants allows primers and repair materials to have direct contact with the substrate, increasing the surface area and roughness of the surface, and providing increased anchorage of the applied material.
EPOXY, ADHESIVES, MASTIC, BLASTRAC REMOVAL
Concrete Floor Polishing & Sealing quickly and effectively removes different topical applications: epoxy, adhesive, mastic, Plaster, paint, glue and many others.
Our company operates self-propelled Blastrac shot blasting machines which provide up to 1,300 FT2 of blasted concrete for each unit. We also use HTC temperature resistant alloy mastic/ glue removal diamonds specifically formulated to remove resin coatings, rubberized membranes and hard-shell polymers.