SIKA - Traffic Topping, Parking Deck Coating Systems
WHAT ARE SIKALASTIC® DUODECK SYSTEMS?
Sikalastic® Duodeck systems incorporate an elastomeric membrane specifically designed to bridge post-application cracks, a flexible, aggregate filled, non-skid wearing course to withstand the most severe vehicular traffic and, in exterior locations, a UV resistant top coat.
Advantages:
- Proven performance, extending over 25 years.
- Product range to meet differing demands and budgets.
- Odor and solvent free polyurethane technology.
- Quick installation for minimal disruption.
- Typically primer-less system.
- Outstanding adhesion to concrete, with or without use of primer.
- Moisture tolerant primer available should conditions or specification require such.
- Bridges post-application cracks up to 1.5 mm (1/16 in).
- Remains elastomeric and resilient during extreme temperature changes.
- Chemically resistant to de-icing salts and all vehicle fluids and fuels.
- Installed by Sika Canada trained and authorized contractors.
- Conforms to CAN / CSA-S413 -07 for Parking Structures.
- Potential LEED® credits - IEQ 4.2 - Low Emitting Material - Paints and Coatings, MR 4 - Recycled Content and MR 6 - Rapidly Renewable Materials
Options within the product range allow for tailored systems to accommodate differing levels of exposure, from pedestrian walkways and parking areas to driving lanes and the most demanding of locations including entrances, ramps and turn aisles.
All systems provide seamless, waterproof and chemical and abrasion resistant surfacing, fully compatible with Sika® repair and renovation systems to provide proven, durable protection to concrete slabs.
Sikalastic® Duodeck is unique in its environmental benefits, including the use of 100% solids, rapidly renewable and recycled raw materials, such as plant oils within the polyurethane resin and reprocessed rubber aggregates, making it a contributor to LEED® Canada credits.
Retroplate - Polishing System
Whether your floors are old or new, industrial, commercial or architectural, the RetroPlate System is designed to meet your unique specifications. Whatever your needs, the RetroPlate System have you covered!
Up to 400% increase in abrasion resistance Up to 21% increase in impact resistance Up to 30% increase in light reflectivity Meets OSHA & ADA SCOF standards to 800 grit finish LEED Qualified in Multiple Areas Spec: Section 03360 – Special Concrete Floor Finish.
The RetroPlate Concrete Polishing System® is the innovative combination of diamond grinding, polishing, and the RetroPlate® densifier. Advanced Floor Products was the first in the concrete polishing industry to combine the effects of diamond grinding and polishing with a one-application densifying sealer.
Concrete floor low cost options to protect and beautify floors. The RetroPlate System emerged to give owners the benefits of coating without ever having to re-apply.
The results? A patented means to permanently strengthen concrete floors that delivers a highly abrasion resistant, dustproofed surface with increased impact resistance and reflectivity. With the RetroPlate System, problem floors are a thing of the past!
The RetroPlate Concrete Polishing System® provides a functional solution to floor problems, as well as being architecturally and design ambitious.
BENFITS:
QUALITY
A RetroPlate floor has no adverse effects from ultraviolet light or water spray (ASTMG23-81). The RetroPlate System creates a durable floor that withstands traffic, abrasion, and daily abuse.
EASE OF MAINTENANCE
By creating a smooth, dust-free surface, maintenance is reduced dramatically, and tire marks are completely eliminated. Join many companies around the world whose maintenance costs for labor and cleaning products have been reduced by up to 90%.
MARBLE-LIKE SHINE
With the RetroPlate System, three levels of shine are provided. Level A is a matte finish, providing a light shine, which increases over time with traffic and regular scrubbing. Level B is a high gloss shine with a good degree of reflectivity. Level C is a marble-like shine, increasing the reflectivity by at least 30%. Each level provides ease of maintenance and will increase the floor's resistance to scratching or wear.
LEED QUALIFIED
The RetroPlate System® is Green and our customers and their customers care about that! RetroPlate® is, pure and simple, a modified sodium silicate that interacts with the calcium hydroxide (free lime) in the cement component of concrete. In utilizing RetroPlate, you and your customers are taking safe, naturally occurring materials to enhance the strength of the concrete.
INCREASES FLOOR HARDNESS
Independent testing has proven that the RetroPlate System increases a floor's impact resistance by up to 21% (ASTM C805).
ABRASION RESISTANCE
The RetroPlate System increases the abrasion resistance of a floor by up to 400% (ASTM C779). As a surface treatment, RetroPlate provides the greatest increase in strength at the top of the floor and allows for unmatched abrasion resistance throughout.
ADDITIONAL SAFETY FEATURES
The RetroPlate System removes dangerous joint slippage. Although imparting a beautiful shine, RetroPlate does not create a slippery floor. The RetroPlate System is environmentally safe.
SEALED FLOOR SURFACE
The RetroPlate System chemically and mechanically locks up pores at the surface of your floor. This densification process inhibits the penetration of water, oils and other contaminants.
UNLIMITED DECORATIVE COMBINATION
The RetroPlate Concrete Polishing System provides a functional solution to floor problems, as well as being architecturally and design ambitious. The unique ability of the RetroPlate System to combine the architectural, artistic nature of design with function and permanence of the best hardener in the business allows for unlimited possibilities for floor design.
ELIMINATES DUSTING
The RetroPlate densification process closes off the surface of the floor and locks in concrete salts, keeping the surface from dusting. This dramatically reduces maintenance costs by keeping equipment, machinery, and finished manufactured products free of concrete dust.BASF - TRAFFIC TOPPING SYSTEMS, PARKING DECK COATING,
CONCRETE POLISHING & SEALING ARE EXPERT INSTALLERS OF BASF PARKING DECK SYSTEMS.
One of the most critical challenges facing parking and stadium structures today is moisture penetration. Unprotected structures suffer from water-induced damage, including deterioration and corrosion caused by alkalis, salts, acids and mold. Liquid applied high performance membranes offer long-lasting protection against the most damaging conditions.
MASTERSEAL® TRAFFIC 2500 - DECK COATING SYSTEM
A high-solids (99%) waterproof polyurethane traffic deck membrane. MasterSeal Traffic2500 is a two-components system for fast cure even in cooler climates. Sand is broadcast into the coating to give it excellent durability and slip resistance. It also has very low odor.
MASTERSEAL TRAFFIC 2000 - DECK COATING SYSTEM
A low odor polyurethane deck coating system for vehicular and pedestrian traffic. This system combines MasterSeal M 200 base coat with MasterSeal Traffic 2000 mid and top coats. It forms a seamless elastomeric membrane and offers excellent durability and superior abrasion resistance.
MASTERSEAL TRAFFIC 2530 - DECK COATING SYSTEM
A fluid applied epoxy/polyurethane waterproofing system comprised of a flexible polyurethane base coat and a semi-rigid epoxy topcoat. MasterSeal Traffic 2530 uses fast setting, two-component reactive curing mechanisms and has very low odor.
MASTERSEAL TRAFFIC 1500 - WATERPROOFING MEMBRANE SYSTEM
A liquid-applied, high-performance, waterproof membrane with an integral aggregate surface. It forms a continuous elastomeric, waterproof, skid-resistant membrane for use on parking decks, stadiums, balconies and other surfaces exposed to vehicular and pedestrian traffic.
MASTERSEAL TC 225 TOP COAT
A tintable top coat for pedestrian traffic areas consisting of 40 standard colors utilizing MasterSeal NP 2 color packs. MasterSeal TC 225 can be used with all MasterSeal waterproofing pedestrian systems for applications on balconies, stadiums, plaza decks, exterior-grade plywood, and mechanical rooms. Provides excellent weatherability.
MASTERSEAL 658 ACRYLIC COATING
A water-based, slip-resistant acrylic coating for asphalt and concrete. It is formulated to last 3 to 5 times longer than asphalt and coal tar sealers and is available in 455 custom colors. When used with MasterSeal 658 Accessories it provides a complete coating system for outdoor recreation areas and surfaces with pedestrian traffic.